MY LABSHOP

Rob Automatic Pipetting System

Rob Automatic Pipetting System
Die Abbildung kann abweichen und Zubehör enthalten, das sich nicht im Lieferumfang dieses Artikels befindet.
  • (Klicken für mehr Informationen)
  • pdf_preview
  • pdf_preview
Lieferzeit auf Anfrage
Bestell-Nr.: 652001K1 Preis: Login Haben Sie Fragen ? Rufen Sie 0043 (01) 244 28 55 oder senden Sie ein mail !
Rob - One Channel Liquid Handling System 

Description


Speed
Rob™ has two modes for doing qPCR set-up. Traditional mode uses one tip for every sample replicate and OneDip™ mode uses the same tip for all replicates doing serial dispensing. The example below is based on a qPCR set-up with three replicates and pre-made master mix.
 
One tip per replicate
96-plate: 27 minutes (18 µl mix + 2 µl sample)
384-plate: 95 minutes (5 µl mix + 2 µl sample)
OneDip™
96-plate: 13 minutes (18 µl mix + 2 µl sample)
384-plate: 45 minutes (5 µl mix + 2 µl sample)
Rob™ handles a 384 set-up with acceptable speed but with low investment cost.
 
Software features
qPCR set-up guide is a stepwise quide to design the protocol of qPCR experiment, optimize the use of reagents, several Master Mixes
Serial dilution maximizes the accuracy of pipetting for serial dilution
Sample normalization simply input two information, sample volume and concentration
 
Accuracy & Precision
Accuracy and precision data obtained under optimized conditions may not be possible to reproduce in your application. The data below were obtained under normal QPCR set-up conditions. On the other hand, high precision data indicates that the liquid handling is stable. Market leading precision can easily be reproduced at your lab. High precision and accuracy also grants that dispense performance is very robust. Changes in viscosity will not have the same impact on dispensed volume seen in competing systems.  So the dispense data below is what you can expect from Rob™ in reality.
 
50 µl pipette tip with filter
Volume (µl) Mean (µl) Precision (C.V.)
1 1.00 3.78
2 1.99 1.83
 5 5.00 0.76
10 10.02 0.38 Ten single dispenses in ten PCR tubes (0.2 ml).
 
50 µl pipette tip with filter, OneDip™
Volume (µl) Mean (µl) Precision (C.V.)
2 2.03 1.93
5 5.05 1.67 Three series dispenses in 3 x3 PCR tubes. Tubes were pre-filled with 15 µl master mix to mimic a qPCR set-up.
 
Liquid Level Detection (LLD)
It is essential to have in-process LLD and tip detection to verify processed protocols. There are two methods used to measure the liquid level heights. Either conductive or pressure based systems are used. The advantages of pressure based LLD are that all liquids can be detected and the system isn’t sensitive for static electricity. Conductive measurements require expensive conductive tips, is sensitive to static electricity but measures faster.  
Rob™ uses a further developed pressure based LLD that has improved detection speed. The LLD system provides with better precision and sensitivity than needed.
Detection limit: Detects as low 3 µl in a 200 µl PCR tube.
Detection precision: ± 0.3 µl in a PCR tube with 20 µl volume.
 
Specifications
Pipette head 0.5 - 200 µl single channel
Dispense modes Single- and multi-dispense modes
Precision CV < 2% for 2µl, dry dispense. CV < 1% from 5 µl, dry dispense
Accuracy CV < 2% from 2 µl. CV 1 % from 5 µl.
Liquid level tracking Pressure based detects volumes from 3 µl in 200 µl PCR tubes.
Pipette tips Clear 50 or 200 µl with or without filter in racks.
Tip waste handling Automatic tip ejection. Ejected tips are collected externally.
Deck capacity 11 SBS micro plate positions and one tip waste position.
Motor resolutions X and Y < 0.01 mm, Z < 0.05 mm.
Dimensions 663 X 516 X 571 mm (w x d x h)
Weight 35 kg. Shipping weight is 60 kg.
Communication USB
Software Supplied with unlimited user license. Free upgrades.
Computer requirements Win7, 8. or 10. 32 or 64-bit i3. or better 8 Gb RAM.
Warranty One year on instrument
mehr