MY LABSHOP

PlateSeal Film Replacement Rolls, for cell, tissue and bacterial cultures

PlateSeal Film Replacement Rolls, for cell, tissue and bacterial cultures
Die Abbildung kann abweichen und Zubehör enthalten, das sich nicht im Lieferumfang dieses Artikels befindet.
Lieferzeit auf Anfrage
Bestell-Nr.: PSRA100RS Preis: Login Haben Sie Fragen ? Rufen Sie 0043 (01) 244 28 55 oder senden Sie ein mail !
2 Rolls (50/Roll)

Breathable Film.
Material: Rayon & Acrylic Adhesive, 139.7 µm, 5.5 mil (Total)
Functional temperature range: -20°C to +80°C
Usable dimensions: 123.8 mm x 82.6 mm

Ideal for cell, tissue and bacterial cultures

The QuickSeal Applicator System includes a re-usable applicator and two rolls of perforated film. Cost effective replacement rolls are sold separately. The applicator facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films.

Designed to seal polystyrene plates in order to minimize evaporation, reduce contamination and facilitate air and CO2 exchange. Features a hydrophobic, gas permeable membrane with medical grade, non-cytotoxic adhesive for cell, tissue and bacterial cultures. The porous membrane consists of layers of heat welded, non-woven rayon fibers with a pore size of 10 to 50 microns, and a moisture vapor transmission rate equal to 4,200gms/m2/24hrs. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. QuickSeal film rolls are environmentally friendly; there is no protective backing paper to remove and discard.

The re-usable polypropylene applicator protects the sealing film from dust and contaminants and can be stood on end when not in use to minimize space. Each sheet is separated by an adhesive-free, color-coded band which allows the user to pull the next sheet without touching the adhesive. Once the film is adhered to the plate, the seal can be perforated from the roll by squeezing the dispenser, in order to prevent the release of additional sheets, and moving it sideways to initiate separation of the sheet from the roll. The smooth lower surface or back-side of the applicator can be used to seal the film to the plate. Replacement rolls can be easily installed by releasing the locking clasps to open the applicator.
mehr